Using SpecView’s “Run External Program” facility in the Strategy Controller, it is possible to send an e-mail, Dial a Pager, Send a text Message or a fax.
SpecView’s Run External program command can send any data (including live data values) to the 3rd Party program. This 3rd Party program needs to have a command-line interface to it.
Although SpecView itself does not have support built in for these functions, there are 3rd party products available that perform the required functions:
Depending on the Pager Service Provider, there are various little utility programs that can cause a pager to be dialed. Check with your Pager service provider for details.
Depending on the Cellular / Mobile Service Provider, there may be ways in which a computer with a modem can dial the Messaging Center and then send a text message to a cellphone. Check with your Cellphone service provider for details.
See here for a service that can be used with SpecView.
SpecView has a little interface program that interfaces between SpecView and Symantec’s “Winfax Pro” fax software. Using this interface program it is possible to cause Winfax to send a fax with a short message on it.
(C) 2017 SpecView Corp & SpecView Ltd. Page Updated: 12 July 2019
SCADA software for people with other jobs!